To ensure that your sample is prepared correctly, please follow these easy steps:
- Shake the bottle of Quick Fix and remove the cap.
- Place the bottle in the center of the microwave. Microwave on high for 10 seconds.
- Remove the container from the microwave and replace the cap. Make sure it is screwed on securely.
- Shake the bottle to ensure even distribution of all the ingredients.
- Check the Read Green Color strip on the bottle to see what the temperature of the liquid is. If there is no reading after microwaving it, then it likely means that the mixture is over 100 degrees, so you’ll need to let it cool for two to three minutes to reach the ideal temperature range.
- Once you’ve reached your desired temperature, remove the cap, and replace it with the included flip cap. This cap is designed to make it easy and mess-free to empty the fluid into your test cup.
- Before your test, you need to ensure that the liquid is kept at a constant temperature source of between 90 and 99 degrees. To do this, we’ve included a heat pack that will keep your synthetic pee warm. Open the heat pack bag and shake it to activate.
- Secure the heat pack to the back of the bottle with a rubber band. Make sure you secure it to the side that is opposite the temperature strip.
- Before you pour the liquid into your test cup, take one last check of the temperature to make sure it’s over 90 degrees and below 100. Then empty the entire bottle of QuickFix into the cup.
- Voila! You’ve done it, and now you can feel confident that you’ll pass your test!
