Microwave to heat Quick Fix Urine

How To Use Quick Fix Synthetic Urine?

/ How to Guides / By

You just received your Quick Fix Synthetic Urine in the mail and need to use it soon, or maybe even at this very moment. So far, you are probably wondering what you should do to heat it correctly, right?

Don’t you worry—we have the answer for you!

In this article, we are going to talk about how to properly heat-prepare Quick Fix Synthetic Urine 6.2 Plus. We will also cover common questions and concerns that customers ask us daily.

And we are pretty sure that you don’t want to show up with overheated urine during your testing. Or even explode the product that you just bought. That would be such a waste!

Quick Fix Synthetic Urine currently has two preparation methods to utilize when heating up the urine. The most common plans are outlined below in a step-by-step process.

If you have any other questions regarding how to use Quick Fix, please read our FAQ page.

Option 1: The Fastest And Most Effective Way To Get Your Quick Fix 6.2 Kit Warm In A Snap

  1. Remove the kit from the box.
  2. Unscrew the cap and place the unit in the microwave for 10 seconds.
  3. Remove the bottle and re-apply the cap provided in the kit.
  4. Shake the bottle.
  5. Open the provided heating pad included and shake well.
  6. Using the rubber band provided, attach it to the bottle, opposite the temp strip.
  7. Secure the liquid somewhere on your body to remain undetected.
  8. The urine will now remain in the acceptable range of 92°F – 99°F.
  9. If you do not get a green light reading on the temp strip, it is too hot. Let it cool down.

Option 2: The Slower Method Of Heating Quick Fix 6.2 If You Have No Microwave Access

Quick Fix Kit

  1. Remove the kit from the box.
  2. Open the provided heating pad and shake vigorously.
  3. Using the rubber band provided, attach it to the bottle, opposite the temp strip.
  4. Secure the liquid somewhere on your body to remain undetected.
  5. This process will now take approximately 30 – 40 minutes to reach the desired temp.
  6. Shake the bottle until you get a green light reading that shows 92°F – 99°F, an acceptable degree range.
  7. If you do not get a green light reading on the temp strip, it is likely not warm enough.

Common Problems That Might Occur When Heating Up Synthetic Urine

setting time on microwave

Scared to make a mistake? Don’t worry! Everybody messes up every once in a while! So if you want to avoid some simple, common mistakes about heat-preparing, just read the passage below.

A common mistake people make when using fake pee is in the preparation method. The directions indicate that you only need to microwave the urine for 10 seconds, nothing more.

But if you put the bottle in the microwave for about 15 – 20 seconds, you did not ruin it. You merely just overheated it.

You will know if the sample is overheated, by the following two signs:

  1. The bottle is hot, but there is no temperature reading on the green strip attached to the container.
  2. You have shaken the sample, and there is still no reading.

This common mistake will in no way ruin the sample’s validity, so no need to worry there. Just merely let the bottle cool on the counter, let’s say about 5 minutes or longer.

Then repeat the entire process from start to finish, utilizing the 10-second method, and no longer than that. You don’t want that little mishap to happen again and doing the WHOLE process over, do you?

And the second most common problem when getting synthetic urine ready for use is not removing the cap. Like anything being warmed up, things expand.

Just like that pot of rice or pasta you may have tried to cook, but it ended up growing. The pasta or rice is breaching the rim, being more than what you had expected. So be sure to remove the cap to prevent any overheating and potential explosion of the plastic bottle.

What To Do Before Using Your Quick Fix Synthetic Urine Kit

Quick Fix directions

Below are some essential steps, along with photo tips on what to look for before using our fake urine. This information you can find on the little green insert, located inside the kit, top left code to be exact. You can either call your Quick Fix batch number in or check it on the website.

1. Quick Fix Batch Numbers

Remember, always check your batch number before use. This number you can find on the little green insert, located inside the kit, top left code. You can call your Quick Fix batch number in or check it on the website.

2. Buy From A Direct Source

Here is a link to the most popular product, Quick Fix Plus.

3. Where To Hide The Quick Fix

The most common place is your underwear, but feel free to get creative.

4. Follow The Instructions

For the non-readers, here is an infographic visual on Quick Fix 6.2:

Quick Fix

Are You Ready To Use Quick Fix Synthetic Urine?

Now that you have read this article, you are ready to heat your “pee!” But if you still do not have one of your own, click here to get your synthetic urine! Here at Quick Fix Synthetic, we have what you need to pass that test!

Any Questions Or Concerns?

Thoughtful women making phone call

Are you still wondering if you are heating it up right? Are you still concerned about what you are doing to heat your synthetic urine? Scared you might end up exploding your bottle of fake pee?

Well, there is no need to worry. Quick Fix Synthetic is here to help you out! Check out our disposable heating pads and ask us about any questions or concerns you may still have about how to heat-prepare your Quick Fix 6.2 Synthetic Urine.

Check out our FAQ page for frequently asked questions about this product.

For further information or questions about the heating process or products that we carry, please feel free to contact us or call us today at 1(866)420-4574. Quick Fix Synthetic is right here to support you!

Resources

https://onlinelibrary.wiley.com/doi/abs/10.1002/dta.2497

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5577974/

https://www.aacc.org/publications/cln/articles/2015/february/drug-testing

About Chris Wilder

Chris Wilder spent many years working as a part-time phlebotomist, [and yes he knows all the vampire jokes] while honing his writing skills. In 2017 he gave up playing around with blood to become a full-time writer. While dealing with blood might seem a cold and analytical vocation, his role of phlebotomist required dealing with nervous patients who needed plenty of empathy and compassion, Chris has carried this over to his written work. He believes that Quick Fix Synthetic products are the best chance of success. With his wide knowledge in this field and his understanding of how urine drug tests can affect the lives of everyday people like you and me, Chris can explain in layman's turns all the important information you need to know. In his free time, he likes to hang out with friends and check out local bands drinking a glass or two of his favorite Makers Mark Bourbon, while enjoying a recreational smoke. To keep himself in shape he takes extremely short walks with Lola, his incredibly lazy pet pug.

View all posts by Chris Wilder