how it works
- step 01
Prior to leaving your house you need to prepare your Quick Fix 6.2 synthetic urine. Open your Quick Fix Urine kit and remove the cap. Place the urine bottle in the microwave for 10 seconds. If you do not have access to a microwave, simply active the provided heating pad and attached it to the Quick Fix bottle. The slower heating pad method will take approx 45 minutes to reach the desired temperature or 92-98 degrees.
- step 02
After your Quick Fix has been heated 10 seconds in the microwave simply cap the bottle, your temperature strip should now read between 92-99 degrees. If your sample is below the 90-degree mark simply place your Quick Fix 6.2 bottle back in the microwave for no more than 3 second to reach the optimal temperature. If your temperature strip has no reading the bottle is too hot. Simply place the bottle on the counter and let it cool until you can get a reading on your temperature strip.
- step 03
Open the Spectrum Labs heating pad provided and shake well. After shaking, simply apply the heating pad opposite side of the temperature strip and get on your way. The heating pad provided will keep your Quick Fix 6.2 urine at the proper temperature for a full 8 hours.